Concretesock® TYPE A FULL CHUTE

Useful Downloads

CHUTE CHOOSER
INSTRUCTIONS

A very common design in both minimix and full size drum classes, oval in shape with small protruding handle just below centre to the left as you look at it which locks the chute once unfolded.

  • Type A 680mm Vertical by 490mm.
     

  • Handle located on the lower left portion of the chute toward the front edge.
     

  • Please Note: The dimensions above are all outer edge of the metal work on the chute.

Concretesock® TYPE A

Concretesock® TYPE B FULL CHUTE

SHOP

Useful Downloads

CHUTE CHOOSER
INSTRUCTIONS

Concretesock® TYPE B

A rounded shape incorporating a locking mechanism to the left, the top section of the chute sits back slightly from the face of the main section behind the hinge eyes.

  •  Type B 520mm Vertical by 510mm.
     

  • Handle located on the lower left portion of the chute toward the front edge.
     

  • Please Note: The dimensions above are all outer edge of the metal work on the chute.

Concretesock® TYPE C FULL CHUTE

 

Useful Downloads

CHUTE CHOOSER
INSTRUCTIONS

Concretesock® TYPE C

A rounded shape incorporating a locking mechanism to the left, the top section of the chute sits back slightly from the face of the main section behind the hinge eyes.

  • Type C 510mm Vertical by 560mm.
    Curved handle located on the upper portion of the chute looping over top section.
     

  • Please Note: The dimensions above are all outer edge of the metal work on the chute

Concretesock® TYPE D FULL CHUTE

Useful Downloads

CHUTE CHOOSER
INSTRUCTIONS

A rounded end to the chute where the top section sits slightly forward of the main chute, a high hooped handle runs along the length of the chute's top section. Side handle located on the left of the upper part of the chute at the front.

  • Type D 500mm Vertical by 520mm. Curved handle located on the upper portion of the chute extending halfway down the top section. With a handle the left of the chute, when facing it.
     

  • Please Note: The dimensions above are all outer edge of the metal work on the chute

Concretesock® TYPE D

Concretesock® TYPE E FULL CHUTE

Useful Downloads

CHUTE CHOOSER
INSTRUCTIONS

A chute with a rounded end where the top section sits back slightly from the face of the main chute, there is a shallow handle running along the length of the top section.

  • Type E 510mm Vertical by 480mm. Shallow handle running the length of the the top section. With a side handle the left of the chute, when facing it.
     

  • Please Note: The dimensions above are all outer edge of the metal work on the chute

Concretesock® TYPE E

Concretesock® TYPE G FULL CHUTE

Useful Downloads

CHUTE CHOOSER
INSTRUCTIONS

A very common design in both minimix and full size drum classes, oval in shape with small protruding handle just below centre to the right as you look at it which locks the chute once unfolded.

  • Type G 680mm Vertical by 490mm. Shallow handle running the length of the the top section. With a side handle the right of the chute, when facing it.
     

  • Please Note: The dimensions above are all outer edge of the metal work on the chute

Concretesock® TYPE G

Concretesock® TYPE H HALF CHUTE

Useful Downloads

CHUTE CHOOSER
INSTRUCTIONS

A very common design in both minimix and full size drum classes but is more common on more modern trucks, half oval in shape with small handles on the edges of the metal work at the end of the chute.

  • ​Type H - 250mm Vertical by 530mm Horizontal.
     

  • Please Note: The dimensions above are all outer edge of the metal work on the chute

Concretesock® TYPE H

Concretesock® TYPE I HALF CHUTE

Useful Downloads

CHUTE CHOOSER
INSTRUCTIONS

A very common design in both minimix and full size drum classes but is more common on more modern trucks, half oval in shape with small handles on the edges of the metal work at the end of the chute.

  • ​​ 270mm Vertical by 460mm Horizontal.

  • Please Note: The dimensions above are all outer edge of the metal work on the chute

Concretesock® TYPE I

 

Purchase online

ABOUT

Concretesock® is a patent protected flexible chute cover thats fits over the end of a Concrete Delivery Trucks chute. All products are manufactured in the UK with the highest grade materials available. 

IP

INSTRUCTIONS

TRADEMARK

 

CONTACT US

 info@concretesock.co.uk

Unit 119 Penmere Drive, Newqauy, Cornwall

Call Dan on 07818 078 970 or Karl on 07999 858 179

©2016 by Concretesock Ltd

Type_G_right